Interlogix TruVision NVR 10 User Manual User Manual
Page 68
Advertising
Chapter 8: Network settings
62
TruVision NVR 10 User Manual
Figure 10: Bad sector detection window
To set up an HDD group:
1. From the menu toolbar, click
System Settings
>
HDD
>
Bad Sector Detection
.
2. Select the HDD you want to test.
3. Select whether you want to do a key sector detection or a full detection, and click
Detect
.
4. The system checks the HDD. The color-coded result is displayed on screen. If there
are bad sectors found, click
Error Info
to see a list of the errors found.
5. If required, click
Pause
to pause the test or
Cancel
to cancel it.
6. Click
Back
to return to live view, or continue configuring the NVR settings.
Advertising