Interlogix TruVision NVR 10 User Manual - Manual (Page 72)

Chapter 9: Camera settings
66 TruVision NVR 10 User Manual
To configure the OSD settings:
1. From the menu toolbar, click Camera Management > OSD .
2. Enter a name for the camera, if required. The name can have up to 32
alphanumeric characters.
3. Check the Display Name, Display Date, and Display Week boxes to display the
camera name, date, and week on-screen.
4. Select a date format and a time format.
5. Select how you want the camera information displayed.
Select one of the options from the drop-down list. Default is non-transparent & non-
flashing.
• Transparent & flashing
• Transparent & not flashing
• Non-transparent & flashing
• Non-transparent & non-flashing
6. There are two text boxes in the camera view window; one for the camera name (red
box) and the other for the date/time (yellow box). Using the mouse, click and drag a
text box to the desired position.
7. Click Apply to save the settings and then click Back to return to live view.
Setting up privacy masking
You can define an area on screen to remain hidden from view. For example, you can
choose to block the view of a camera when overlooking residential premises. This
hidden area is referred to as privacy masking. Privacy masking cannot be viewed in live
view or in recorded mode, and appears as a black area on the video image.
To setup a privacy mask:
1. From the menu toolbar, click Camera Management > Privacy Mask .
2. Select the camera for which to set up privacy masking.
3. Check the Enable Privacy Mask box to enable the feature.