Coway BA08-AR - Manual (Page 13)

13
H
ow
To U
se
KEEP
iN
mi
ND / PREP
AR
AT
iONS
PREPARATIONS
 After installation
Check if there is a leak in the main water supply valve and the
connection hose. You must insert the rubber packing between the
T-shaped connection pipe and the main water supply valve.
 Periodic filter replacement
It is important to replace the filter periodically for the clean rinsing.
If the filter is overused beyond its service life, the filter performance
deteriorates, resulting in cleansing water that is not filtered properly.
Please keep the filter replacement cycle.
 Filter replacement cycle : Every 4 months.
 if the bidet has not been used for a long time
When you don’t use the product for a long time, use it after replacing
the filter and cleaning the products such as an air dryer outlet, a
nozzle, seat according to each cleaning methods (See P.26).
 If there is a foreign material or a water drop on the signal transmitter of the remote
control or on the signal receiver of the control panel of the bidet’s remote control,
the remote control communication may be inhibited.
 The remote control may not work properly where there is strong light such as three-
wavelength lamp light or strong electromagnetic waves are created.
 Remove the protective film from the control panel before use.
Tips
This product is for 120 V~, 60 Hz only .
Please connect the power plug to a dedicated grounded
electrical outlet for 120 V~, 60 Hz.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 13 2009.6.10 6:16:50 PM