Coway BA08-AR - Manual (Page 20)

20
INSTALLATION
 installing the product
Tighten the fixing nuts firmly so that the bidet body won’t be shaky on
the toilet.
 Product installation place
As the bidet should be installed on the toilet, take caution not to have
water splashed on the bidet.
 After installation
Keep the removed existing toilet seat in a shaded place to prevent its
damage.
 Cold water pipe
Please connect to the cold water pipe (If the product is connected to the
warm water pipe, the filter and hose may be damaged).
 To secure the optimum performance of the product, consult with an installation
expert for further installation.
 There may be some water remaining inside the filter which was used to test the
product during the inspection process at the factory.
- The remaining water does not mean that the product was previously used.
Tips
Keep the existing
toilet seat in the
shaded place
Warm
water
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 20 2009.6.10 6:16:59 PM