Coway BA08-AR - Manual (Page 26)

26
CLEANING METHOD
Uninstallation the product
1 . Unplug the power plug from the outlet .
2 . Close the main water supply valve .
3 . Place a big wash basin (1 L or more) under the rear
drain hole of the bidet .
4 . Turn the drain stopper to 1 counter clockwise by 90 °
and pull out it in the direction of 2 to remove it .
- Please assemble the drain stopper to the product again after
draining.
5 . Please separate the product by removing the fixing
nuts in the fixing screw and lifting the bidet .
- Please pull out the power plug and separate the bidet hose from
T-shaped connector before separating the product.
- When storing the product, separate the filter fixed stopper and MF
filter from the bidet and store them with installation materials.
- Exercise caution not to lose fixing screws and fixing nuts.
When you don’t use the product for a long time, unplug after turning off the main water
supply valve and emptying the water inside the water tank.
Tips
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 26 2009.6.10 6:17:3 PM