Coway BA08-AR - Manual (Page 21)

21
M
ain
tenanc
e
iNST
ALL
AT
iON
| Uninstalla
tion Existing
Toilet sea
t |
installa
tion the P
roduc
t
Uninstallation Existing Toilet Seat
1 . Remove the fixing nuts of the existing seat
and separate the existing toilet seat 1 and
the seat cover 2 .
 Keep the removed seat and the removed seat cover in a shaded
place.
Installation the Product
1 . Turn off the main water supply valve 1 on the water
pipe and separate the existing water tank hose 2 .
2 . Connect the rubber packing, T-shaped connector, and
water tank hose to the existing main water supply
pipe . Please connect the bidet hose to the T-shaped
connector .
 Please insert the rubber packing between the water pipe and the
T-shaped connection pipe necessarily.
 Firmly rotate the nuts below and on top of the T-shaped connector to the end clockwise.
3 . Please assemble by turning the mF filter on the filter
holder to the arrow direction as the figure .
 If the filter is assembled loosely, the bidet may not function
normally. Firmly connect the filter.
4 . Please connect the filter assembled the filter holder in
the rear of the product and fix using the filter clip .
Check if the filter clip is inserted correctly. When the main water
supply valve is opened, if the filter clip is loosely fitted, as the filter
holder may be separated, the water may splash and it may cause
injury.
It is not possible to separate the filter clip once it is fitted to the product.
When the problem occurs due to the filter clip, call the service center.
1021214 BA08-A 사용설명서_미주향_(09.06.10)_003.indd 21 2009.6.10 6:17:0 PM