Philips VHS VR6393 - Manual (Page 17)

Note:
If a block number Is already programmed, the Display shows,
for example:
T 1 ITICO
1 1 / IL.K
1
1
oo oo
® Press 9 (9 again.
The Display shows, for example:
C T O O T
_j I I
l O - o n
® Press + or — or the digit buttons (0-9) on the remote controi
to set the start time.
Note:
To change the time slowly press -i- or — once.
To change the time quickly, press and hold + or —.
Press X to set the start time to 20:00.
VPS
A VPS recording only works if you have entered exactly to the
minute the advertised start time (VPS time) of a TV programme.
If an additional VPS time, which differs from the advertised start
time Is Indicated in your TV magazine, this one must be entered
Instead of the advertised start time.
® Press 9 (9 again.
The Display shows, for example:
C h (T(
DD.CC
Note:
If you press X first, the start time you have just set will be
shown again and can quickly be changed into the stop time.
® Press -P or — or the digit buttons (0-9) on the remote control
to set the stop time.
® Press ^ (^ ^) again.
The Display shows, for example:
TIQTl-
J J I l 1 l_
O f
Note:
If the Display shows another indication, e.g. for daily or weekly
recording, press X one or more times.
® Press -P or — or the digit buttons (0-9) on the remote control
again to set the recording date.
Notes:
— If today is the 16th of March and you program the date as
‘14’, the recording will be made on the 14th of April.
— For a TV programme starting at midnight (0:00), give the
date of the following day.
To repeat recording every day at the same time:
• Press X one or more times until the Display shows:
111.J 1 \/
±11 1 l_ 1
oo
• Press -P or — as many times as necessary to select the
correct date on which the first recording has to be made.
To repeat recording every week on the same day and at the
same time:
• Press X one or more times until the Display shows:
• Press -P or — as many times as necessary to select the
correct date on which the first recording has to be made.
® Press 9 (9 ^) again.
The Display shows, for example:
OUi <C
I ;'uu.
® Press -p or — or the digit buttons (0-9) on the remote control
to select the correct TV station to be recorded.
Notes:
— if TIMER-biock 6 is selected, on the display appears
‘PAGE—’.
Press 9 (9 ^) and fill in the correct TXT-subtitle page
number (3 position).
Push X if you wish to programme this TIMER-biock without
TXT-subtitle.
VPS
If 'VPS’ is shown on the Display, the VPS control has been
switched on for this block. If a TV station does not transmit a
VPS code, the VPS control has no function.
• Press X to switch off the VPS control for this block ('VPS'
disappears). The video recorder then uses the times you have
entered to record.
• If you want to switch on the VPS control, press X again.
® Press 9 (9 <^) once more.
For 5 seconds the Display shows, for example:
T 1 ITII7"G
1 1 / l)_/v
3
ESSSIl
OO oo
EHm is shown on the Display as well.
® Press 10 to switch the video recorder to standby.
@ 13