Philips VHS VR6393 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sleep function
One Touch Recording is also useful if you want the video
recorder to finish a recording automatically, for instance when
you are going to bed.
In this case press the two buttons (A with OTR) as many times
as required to continue and finish the recording.
EXTRAS
11
If you want to improve picture quality and your TV has a 21 -pin
connector @)
• Connect the corresponding 21-pin sockets on the TV and the
video recorder using a special cable.
Consult your dealer for the correct cable.
OTHER RECORDING
POSSIBILITIES
12
Recording from another video recorder (copying)
Copying via the 21-pin connectors I
@ Connect the 21-pin connector on your recording video
recorder and the playback video recorder using a special cable.
Your dealer can advise you which cable to use.
(D
Insert the pre-recorded cassette in the playback video
recorder and a cassette with intact erase tab in your recording
video recorder.
d) Press -i- or — until ‘E’ appears on your recording video
recorder or press digit button 0 on the remote control.
(‘E’ is below preselection number T.)
® Press • on your recording video recorder.
(D
Press the Play button on the playback video recorder.
d) Press the Stop buttons on both video recorders to stop
copying.
Copying via the aerial sockets 1 f and (^:
® Connect El on your recording video recorder to the Aerial-in
socket on the TV set as for normal installation.
d) Use another aerial cable to connect 1 f on your recording
video recorder to the Aerial-out put socket on the playback video
recorder.
d) Switch on your TV and select on it the preselection (program)
number for the recording video recorder.
16 ^i)