Philips VHS VR6393 - Manual (Page 19)

To repeat recording every week on the same day and at the
same time:
• Press X on the remote controi untii the Display shows:
TIMER2
STARTo n . n n
1 C
(_ (_l ■ L.I !_l 1 __ 1 -imLY.
STOP O O - O C
L. (_ ' ^ 1 ^ 1
• Press the digit buttons (0-9) on the remote control to select
the correct date on which the first recording has to be made.
® Press (9 RC) again.
Note:
If an Invalid date has been entered, the date Is automatically
reset to ‘01' and the correct date has to be entered again.
If the correct date has been entered, the Display shows for
example;
TIM ER 2
START 1C
'
!_(■' I(_I lU
« 1 1 1
STO P in
L_ i_ ’ w-l W.I lU
® Press (0-9) to enter the program number of the TV station to
record from.
VPS
If ‘VPS' Is shown on the Display, the VPS control has been
switched on for this block. If a TV station does not transmit a
VPS code, the VPS control has no function.
• Press X to switch off the VPS control for this block (‘VPS’
disappears). The video recorder then uses the times you have
entered to record.
• If you want to switch on the VPS control, press X again.
® Press (9 RC) once more to complete the timer
programming.
Note:
If an Invalid program number has been entered, e.g. 65, the
Display shows ‘E’ and the correct program number has to be
entered again.
When the programming has been completed correctly, the
Display shows for example:
TIMER 2
- TRANSMlf-
^11 1 1 \
START i r
!_
U ' U U 1^1
STOP ^1
'"I.
n
r
PROS i n VPS
!_
C ' O u l U
® Press ((((O) to send the recording details to the video
recorder.
During the transmission the symbol o))) lights up.
The Display shows, for example:
i n . r
ri“^
i r
CLO CK
I W U U l U
The Display of the video recorder shows:
‘TIMER’, and and a number of the selected block if the
fram transmission is accepted.
‘ERROR’ if an error occurred during the transmission, or
the transmitted data are not correct (e.g. start
time equal to stop time).
Checking or changing TIMER block details
(?) Press 9 (9 <3*) or (9 RC) once.
d) Press + or — or (0-9) until the Display shows the required
TIMER block to be checked or changed.
d) Press ^ (9 < ^ ) or (9 RC) again.
The Display shows the start time of the recording.
@ if you press ^ (^ •$<■) or (^ RC) repeatedly, the Display
shows the stop time, date and program number.
You can change the details as they appear pressing or — or
(0-9).
® Press ^ (9 < ^ ) or (^ RC) once more.
If you have-used (^ RC) on the remote control:
• Press ((((O) to transmit the data, to the video recorder.
Cancelling a TIMER block
You can cancel a TIMER block of a recording already in
progress, or of a recording which has not yet started:
© Press 9 (9 < 3 .) or (9 RC).
@ If necessary, press -I- or — or (0-9) to select the TIMER
block to be cancelled.
@ Press X.
If you have used (^ RC) on the remote control:
• Press (IHO) to transmit the data, to the video recorder.
One Touch Recording (OTR)
Use OTR to record immediately for 30, 60 minutes, etc.
© Load a cassette.
® Press -1- or — to select the TV station you want to record
from.
@ Press the two buttons (A with OTR) on the remote control
simultaneously to start the recording.
The Display shows, for example:
oc>~
/'/_(_ p u
Eu!
OTR
•
nn.
i_ i_ •
The time shown is the time the recording will stop.
® Each time you press the two buttons (A with OTR)
simultaneously, the recording time is extended by 30 minutes.
If you go too far, press X to return to the current time -I- 30
minutes.
Note:
If you want to stop the OTR, press ■ or lO-
(gg) 15