Philips VHS VR6393 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

0 Insert the pre-recorded cassette in the playback video

recorder and a cassette with intact erase tab in your recording

video recorder.

0 Press the Piay button on the playback video recorder.

0 Press C/P and -i- or — to select the channel number on your

recording video recorder on which the piayback video recorder
is transmitting. With most video recorders this is around UHF
channel 37 (see the Operating Instructions of the playback video
recorder).

© Press • on your recording video recorder.

0

Press the Stop buttons on both video recorders to stop

copying.

It Is forbidden to copy pre-recorded tapes if this infringes

copyright or other rights of third parties.

WATCHING TV VIA THE VIDEO

RECORDER

(TUNER MODE)

13

• Switch on the TV.

• On the TV select the preselection number for the video

recorder.

Press lO to switch the video recorder to standby.

• Select the TV stations using -P or — or the digit buttons (0-9)

on the remote control.

The display shows, for example;

r

1

(ft lOO

1

i_l(M/_/C

P

li_

S3

Ori-UC

i-U* Iwl

Note:

The video recorder remains in the Tuner mode.
To cancel this mode, press either ■, ►, •, or lO-

Timed recordings cannot be made in Tuner mode.

CASSETTES

14

VHS cassettes can be used on one side only.

What you should do:

— Buy only high quality cassettes, cassettes of inferior quality

make your valuable video heads dirty.

Do not:

— dismantle the cassette
— touch the tape
— drop or shake the cassette.

Storing cassettes:

Always rewind the tape to the beginning before storage.

Store the cassettes:

— vertically

— at room temperature.

Keep the cassettes away from:

— dust

— extreme humidity
— bright sunlight

— loudspeakers
— electric motors

— transformers
— magnets.

Protecting recorded cassettes:

To prevent erasure of recordings, break off the erase tab on the

rear edge of the cassette with a screwdriver.

Removing cassette protection:

Cover the hole from which the tab was removed with adhesive

tape.

Replace any partly detached adhesive tape.

(gi) 17

Advertising