Ch) norge, Ò italia, Important notes for users ¡n the u.k – Philips AJ3720 User Manual

Page 2: Deutsch, Index

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INDEX

CH) Norge

ADVARSEL

Typeskilt finnes pà apparatens bakside.

Observer:

Nettbryteren er sekundert innkoplet. Den

innebygde netdelen er derfor ikke frakoplet nettet sà
lenge apparatet er tilsluttet nettkontakten.

For à redusere faren for brann eller elektrisk slot, skal

apparatet ikke utsettes for regn eller fukighet.

Ò Italia

DICHIARAZIOIME PI COIMFORIVIITA'__________

Si dichiara che l’apparecchio AJ 3720 Philips
risponde alle prescrizioni deH'art. 2 comma 1 del

D. M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven, il 20/05/1997

Philips Sound & Vision

Philips, Glaslaan 2, SFF 10

5616 JB Eindhoven, The Netherlands

Important notes for users ¡n the U.K.

Mains plug

This apparatus is fitted with an appwed moulded 13

Amp plug. To change a fuse in this type of plug

proceed as follows:

• Remove fuse cover and fuse.

• Fix new fuse which should be a BS1362 5 Amp,

A.S.T.A. or BSI approved type.

• Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets,

it should be cut off and an appropriate plug fitted in

its place.
If the mains plug contains a fuse, this should have a

value of 5 Amp. If a plug without a fuse is used, the

fuse at the distribution board should not be greater
than 5 Amp.

Note:

The severed plug must be disposed to avoid a

possible shock hazard should it be inserted into a

13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the

following code: blue = neutral (N), brown = live (L),
As these colours may not correspond with the colour
markings identifying the terminals in your plug,

proceed as follows:

Connect the blue wire to the terminal marked N or

coloured black.

Connect the brown wire to the terminal marked L or

coloured red.

Do not connect either wire to the earth terminal in

the plug, marked E (or A) or coloured green (or

green and yellow).

Before replacing the plug cover, make certain that the

cord grip is clamped over the sheath of the lead - not
simply over the two wires.Copyright in the U.K.:

Recording and playback of material may require

consent. See Copyright Act 195B and The Performer’s
Protection Acts 1958 to 1972.

Deutsch.

.... 31

Advertising
This manual is related to the following products: