Pause display/resume display, Clear display, Restart – Cisco VPN 3002 User Manual

Page 195: Timer

Advertising
background image

13-7

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13 Monitoring

Monitoring | Live Event Log

Figure 13-4 Monitoring | Live Event Log Screen

Pause Display/Resume Display

To pause the display, click Pause Display. While paused, the screen does not display new events, the
button changes to Resume Display, and the timer counts down to 0 and stops. You can still scroll through
the event log. Click the button to resume the display of new events and restart the timer.

Clear Display

To clear the event display, click Clear Display. This action does not clear the event log, only the display
of events on this screen.

Restart

To clear the event display and reload the entire event log in the display, click Restart.

Timer

The timer counts 5 – 4 – 3 – 2 – 1 to show where it is in the 5-second refresh cycle. A momentary Rx
indicates receipt of new events. A steady 0 indicates the display has been paused.

Advertising