Cisco VPN 3002 - Manual (Page 69)

C H A P T E R
7-1
VPN 3002 Hardware Client Reference
OL-1893-01
7
IP Routing
The VPN 3002 includes an IP routing subsystem with static routing, default gateways, and DHCP.
To route packets, the subsystem uses static routes and the default gateway. If you do not configure the
default gateway, the subsystem drops packets that it can not otherwise route.
You configure static routes and default gateways in this section. This section also includes the
system-wide DHCP (Dynamic Host Configuration Protocol) server parameters.
Configuration | System | IP Routing
This section of the Manager lets you configure system-wide IP routing parameters.
• Static Routes: manually configured routing tables.
• Default Gateways: routes for otherwise unrouted traffic.
• DHCP: Dynamic Host Configuration Protocol global parameters.
• DHCP Options : facilities that allow the VPN 3002 DHCP server to respond with configurable
parameters for specific kinds of devices such as PCs, IP telephones, print servers, etc., as well as an
IP address.
Figure 7-1 Configuration | System | IP Routing Screen