System capability failures, No-sa failures, Protocol use failures – Cisco VPN 3002 User Manual

Page 210: Monitoring | statistics | http

Advertising
background image

13-22

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13 Monitoring

Monitoring | Statistics | HTTP

System Capability Failures

The total number of system capacity failures that occurred during processing of all currently and
previously active IPSec Phase-2 tunnels. These failures indicate that the system has run out of memory
or some other critical resource; check the event log.

No-SA Failures

The cumulative total of nonexistent-Security Association failures which occurred during processing of
all currently and previously active IPSec Phase-2 tunnels. These failures occur when the system receives
an IPSec packet for which it has no Security Association, and might indicate synchronization problems.

Protocol Use Failures

The cumulative total of protocol use failures that occurred during processing of all currently and
previously active IPSec Phase-2 tunnels. These failures indicate errors parsing IPSec packets.

Monitoring | Statistics | HTTP

This screen shows statistics for HTTP activity on the VPN 3002 since it was last booted or reset.

To configure system-wide HTTP server parameters, see the Configuration | System | Management |
Protocols | HTTP screen.

Figure 13-10 Monitoring | Statistics | HTTP Screen

Advertising