Action, Configuration – Cisco VPN 3002 User Manual

Page 132

Advertising
background image

12-6

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 12 Administration

Administration | System Reboot

Figure 12-6 Administration | System Reboot Screen

Action

Click a radio button to select the desired action. You can select only one action.

Reboot = Reboot the VPN 3002. Rebooting terminates all sessions, resets the hardware, loads and
verifies the software image, executes system diagnostics, and initializes the system. A reboot takes
about 60-75 seconds. (This is the default selection.)

Shutdown without automatic reboot = Shut down the VPN 3002; that is, bring the system to a halt
so you can turn off the power. Shutdown terminates all sessions and prevents new user sessions (but
not administrator sessions). While the system is in a shutdown state, the

SYS

LEDs blink on the front

panel.

Cancel a scheduled reboot/shutdown = Cancel a reboot or shutdown that is waiting for a certain
time or for sessions to terminate. (This is the default selection if a reboot or shutdown is pending.)

Configuration

Click a radio button to select the configuration file handling at reboot. These selections apply to reboot
only. You can select only one option.

Save the active configuration at time of reboot = Save the active configuration to the

CONFIG

file,

and reboot using that new file.

Reboot without saving the active configuration = Reboot using the existing

CONFIG

file and

without saving the active configuration. (This is the default selection.)

Advertising