Cisco VPN 3002 - Manual (Page 251)

14-5
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 14 Using the Command-Line Interface
Using the Command-line Interface
As a shortcut, you can just enter 2.4.1.1 at the Main-> prompt, and move directly to the Modify
Administrators menu:
1) Configuration
2) Administration
3) Monitoring
4) Save changes to Config file
5) Help Information
6) Exit
Main ->
2.4.1.1
> Which Administrator to Modify
Admin ->
Note At this last prompt, you cannot use a number shortcut. At this prompt, you must type in the name of
the administrator you want to modify, for example,
config .
Admin -> config
The prompt always shows the current context in the menu structure.
Using Back and Home
Most menus include a numbered Back choice. Instead of entering a number, you can just enter b or B to
move back to the previous menu.
Also, at any menu level, you can just enter h or H to move home to the main menu.
Getting Help Information
To display a brief help message, enter 5 at the main menu prompt. The command-line interface explains
how to navigate through menus and enter values. This help message is available only at the main menu.
Cisco Systems. Help information for the Command Line Interface
From any menu except the Main menu.
-- ’B’ or ’b’ for Back to previous menu.
-- ’H’ or ’h’ for Home back to the main menu.
For Data entry
-- Current values are in ’[ ]’s. Just hit ’Enter’ to accept value.
1) View Help Again
2) Back
Help -> _
To return to the main menu from this help menu, enter h or H (for home), or 2 or b or B (for back) at the
prompt.