Philips MAS-300 - Manual (Page 20)

Radio Reception
Manual Preset Programming
Tune to your desired radio station (refer to
'Tuning to ràdio stations"),
Press PROGRAM.
^ moo starts flashing.
The next available preset number is displayed
for selection.
To store the radio station to another
preset number
Press M or M to select the desired preset
number
Press PROGRAM again to store the radio
station.
H PROS disappears.
Repeat steps 1-3 to store other radio stations.
1b exit manual preset mode
Press ■ on the system.
Nows.'
- If you attempt to store more than 40 preset
radio stations, "PRDGRfiH filLL" Is displayed.
- During programming, if no key is pressed within
20 seconds, the system will exit the Program mode
automatically.
Tuning to preset radio stations
Once you've programmed the radio stations,
press M or Pi to select the desired preset
number,
^ The preset number radio frequency, and
waveband are displayed.
Erasing a preset radio station
Press M or M to select the preset radio station
to be erased.
Press and hold ■ on the system until "PRE5E f
S€LZ TZS"is displayed.
^ The deleted radio frequency remains on the
display.
The preset numbers of all other preset radio
stations in the band with higher numbers are
also decreased by one.
Repeat steps 1-2 to erase other preset radio
stations.
For Recording, please refer to "Tape
OperotionlRecordin/f'.
20