Philips MAS-300 - Manual (Page 28)

Troubleshooting
GENERAL
The $ystem does not react when buttons
are pressed.
- Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor - Adjust the volume.
quality. - Disconnect the headphones.
- Check that the speakers are connected correctly.
- Check if the stripped speaker wire is clamped.
The left and right sound outputs are
reversed.
- Check the speaker connections and location.
The remote control does not function - Select the source (CD 1 /2/3 orTUNER, for
properly. example) before pressing the function button
- Reduce the distance between the remote
control and the system.
- Insert the batteries with their polarities
(+/- signs) aligned as Indicated.
- Replace the batteries.
- Point ^e remote control directly towards the IR
sensor
The timer is not working. - Set the clock correctly.
- Press and hold CLOCK'TIMER to switch on the
timer.
- If recording or tapes dubbing is in progress, stop
recording.
The Ciock/Timer setting is erased. - Power has been interrupted or the power cord
has been disconnected. Reset the clock/timec
The system displ^s features - Press and hold • on the system to switch off
automatically. the demonstration.
28