Cisco 7937G - Manual (Page 52)

44 OL-11559-01
Controlling Line Settings on the Web
Line settings include call-forwarding, voice message indicators, ring types, and line text labels that you
set up for your conference station.
Note • You can set up call forwarding directly on the conference station. See Forwarding All
Calls to Another Number, page 19 .
• To learn about phone settings that you can access directly on the conference station, see
Changing Conference Station Settings, page 29 .
• By default, the ring type and line text label options do not display on your User Options
web pages. See your system administrator to set up these options so you can access them.
This section describes the line settings you can update from your User Options web pages. To access
your User Options web pages, see
Accessing Your User Options Web Pages, page 37 .
If you want to... Then do this after you log in...
Set up call forwarding 1. Choose User Options > Device.
2. If you have more than one device, select a device.
3. Click Line Settings.
4. In the Incoming Call Forwarding area, choose call forwarding settings
for various conditions.
5. Click Save.
Change the message
indicator setting 1. Choose User Options > Device.
2. If you have more than one device, select a device.
3. Click Line Settings.
4. In the Message Waiting Lamp area, choose a policy from the
Message Waiting Lamp Policy drop-down list.
The policy tells the conference station how to indicate a new voice
message. The conference station can display a light and/or a prompt
(a message on the conference station screen).
Note Typically the System Policy prompts the conference station to display a
steady red light to indicate a new voice message.
5. Click Save.