Cisco 7937G - Manual (Page 53)

Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 45
Change the audible
message indicator
setting 1. Choose User Options > Device.
2. If you have more than one device, select a device.
3. Click Line Settings.
4. In the Audible Message Waiting Indicator area, choose a policy from
the Audible Message Waiting Indicator Policy drop-down list.
If you turn the message indicator on, and you have a new voice
message, you will hear a stutter dial tone when you place a call.
5. Click Save.
Change the ring type 1. Choose User Options > Device.
2. If you have more than one device, select a device.
3. Click Line Settings.
4. In the Ring Settings area, choose a setting to tell the conference station
how to indicate an incoming call.
5. Click Save.
Note The “idle” ring setting pertains if you receive an incoming call when the
conference station is idle. The “consecutive” ring setting pertains if you
receive an incoming call when the conference station is active.
Update the text (line
text label) that displays
on the called party’s
conference station that
identifies your
directory number. 1. Choose User Options > Device.
2. If you have more than one device, select a device.
3. Click Line Settings.
4. In the Line Text Label area, enter the text that will identify your
directory number when you call another conference station.
Note If you do not specify a line text label, your directory number will
display on the called party’s conference station.
5. Click Save.
Note The conference station uses the ASCII Label field if the
conference station does not support double-byte character sets.
If you want to... Then do this after you log in...