Connecting your conference station, Connecting the conference station to the network – Cisco 7937G User Manual
Page 12
Advertising
4
OL-11559-01
Connecting Your Conference Station
Your system administrator will likely connect your new Cisco Unified IP Conference Station 7937G to
the corporate IP telephony network. If that is not the case, refer to the following graphics and tables
to connect the conference station.
Connecting the Conference Station to the Network
The following graphic and table describe how to connect the conference station to the network.
Note
Connecting multiple conference stations is not a supported configuration and will not work.
1
Connection of end of network cable (without ferrite bead) to RJ-45 port on bottom of
conference station
2
Network cable (25-foot)
3
Connection of end of network cable (with ferrite bead) to LAN port
1
2
3
185259
Advertising