Cisco 7937G - Manual (Page 36)

28 OL-11559-01
Using Cisco Extension Mobility
Cisco Extension Mobility (EM) allows you to temporarily configure a conference station as your own.
Once you log in to EM, the conference station adopts your user profile, including the conference
station line, features, established services, and web-based settings. Your system administrator must
configure EM for you.
Tips
• EM automatically logs you out after a certain amount of time. This time limit is established by
your system administrator.
• Changes that you make to your EM profile (from your User Options web pages) take effect the
next time that you log on to EM on a conference station.
• Settings that are controlled only on the conference station are not maintained in your EM profile.
Using AutoAnswer
When AutoAnswer is enabled, your conference station answers incoming calls automatically after a
few rings. Your system administrator configures AutoAnswer to use the conference station. You might
use AutoAnswer if you receive a high volume of incoming calls.
If you want to... Then...
Log on to EM 1. Choose > Services > EM Service (name can vary).
2. Enter your userID and PIN (provided by your system administrator).
3. If prompted, select a device profile.
Log off of EM 1. Choose > Services > EM Service (name can vary).
2. When prompted to log out, press Yes.