Cisco 7937G - Manual (Page 39)

Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 31
Using Call Logs and Directories
This section describes how you can use call logs and directories on your Cisco Unified IP Conference
Station 7937G. To access both features, use the Directories button
.
Using Call Logs
Your conference station maintains call logs. Call logs contain records of your missed, placed, and
received calls.
If you want to... Then...
View your call logs Choose > Missed Calls, Placed Calls, or Received Calls. Each log stores
up to 100 records. To view a truncated listing, highlight it and press EditDial.
Erase your call logs Choose , and then press Clear. This erases all records in all logs.
Dial from a call log
(while not on
another call) 1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record from the log.
3. Go off-hook to place the call.
Dial from a call log
(while connected to
another call) 1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Highlight a call record from the log.
3. Press Dial.
4. Choose a menu item to handle the original call:
– Hold—Puts the first call on hold and dials the second.
– Transfer—Transfers the first party to the second and drops you from
the call. (Press Transfer again after dialing to complete the action.)
– Conference—Creates a conference call with all parties, including you.
(Press Confrn again after dialing to complete the action.)
– EndCall—Disconnects the first call and dials the second.