Canon IMAGERUNNER 2020 - Manual (Page 153)

Specifying Common Settings 5-37
Customizing Settings
5
Returning the Common Settings to Their Defaults
You can restore all of the Common Settings to their default (initial settings).
NOTE
If the Display Language mode is set, and then the Common Settings are returned to their
default settings, the language shown on the LCD display remains unchanged. (See
"Changing the Language Shown on the LCD Display," on p. 5-35.)
1
Press [Additional Functions]
➞ [
] or [ ] until
<COMMON SETTINGS> appears
➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <INIT. COMMON SET.> appears
➞
press [OK].
The <INIT. COMMON SET.> menu appears.
3
Press [ ] or [ ] to select <ON>
➞ press [OK].
To cancel initializing the Common Settings, select <OFF>.
The Common Settings are returned to their defaults.
4
Press [Stop] to return to the Standby display.
OK
Additional
Functions
OK
COMMON SETTINGS
14.INIT. COMMON SET.
INIT. COMMON SET.
OFF
OK INIT. COMMON SET.
ON
ADD. FUNCTIONS
2.COPY SETTINGS
Stop