Canon IMAGERUNNER 2020 - Manual (Page 55)

What This Machine Can Do 2-3
Basic O
p
er
ations
2
Printing See the PCL/UFR II Printer Guide
This machine uses UFR II (Ultra Fast Rendering
II) Technology, which utilizes a newly invented
printing algorithm to minimize file processing
and achieve maximum performance. Also, if
you install the optional PCL Printer Kit-J1, you
can use the machine as an emulation printer of
PCL5e and PCL6.
Using the Remote User Interface See the Remote UI Guide
You can control functions, such as confirming
the status of the machine and job operations, all
from your computer’s Web browser.
The imageRUNNER 2020/2016 comes standard
equipped with a direct Ethernet connection
interface. Once the Ethernet interface port is
configured properly, the imageRUNNER
2020/2016 can be controlled and set up
through the Remote UI and network. Also, you
can use the Remote UI to fax from your
computer using the Ethernet connection. (If the
optional Super G3 FAX Board and Fax Driver
are installed.) For instructions on configuring
the Ethernet port, see the Network Guide.
Network Interface See the Network Guide
This machine can be connected to a network
using Ethernet (standard equipment).
Connecting to a network enables you to use
utility software, including the Remote UI,
NetSpot*, NetSpot Console, etc.
NetSpot enables you to manage and make
various settings for the printers and copiers
connected to a network from a PC. NetSpot
Console enables you to perform the same
operations as NetSpot, but from a Web browser.
*NetSpot and NetSpot Console can be downloaded
from Canon’s Web site (http://www.usa.canon.com),
and they are supplied with the optional PCL Printer
Kit-J1.
1
Sending data
from computers Printing
Web
Browser
Device Information
Manage