Canon IMAGERUNNER 2020 - Manual (Page 215)

Feeder (DADF-P1) (Optional) 7-13
Rou
tin
e Ma
int
ena
nce
7
2
Remove the old stamp cartridge using the tweezers.
NOTE
Widen the tweezers if necessary.
3
Insert a new stamp cartridge into the feeder until it clicks
using the tweezers.
IMPORTANT
• Set the stamp cartridge so that the two projections on the cartridge are aligned with
the hollows on the feeder.
• Be careful that the stamping surface of the stamp cartridge does not protrude.
• Insert the stamp cartridge properly, or it may cause paper jams.