Canon IMAGERUNNER 2020 - Manual (Page 139)

Specifying Common Settings 5-23
Customizing Settings
5
Auto Paper Selection/Auto Drawer Switching
You can set which paper sources can be used for Automatic Paper Selection and
Automatic Drawer Switching. This setting can be made independently for all
functions of the machine (Copy, Print, and Fax), and is especially useful when you
want to use different paper sources for different purposes.
NOTE
• Paper sources set to 'ON' are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper
size (paper source) based on the original’s size and copy ratio settings (when making a
copy), or the set ratio of the image (when receiving a fax).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous
print job, the machine automatically selects another paper source with the same paper
size, and begins feeding paper from that paper source.
• The default settings are 'OFF' for the stack bypass, and 'ON' for the other paper sources.
1
Press [Additional Functions]
➞ [
] or [ ] until
<COMMON SETTINGS> appears
➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <AUTO DRAWER SELCT>
appears
➞ press [OK].
The <AUTO DRAWER SELCT> menu appears.
OK
Additional
Functions
OK
COMMON SETTINGS
6.AUTO DRAWER SELCT
AUTO DRAWER SELCT
1.COPY