Feeder (dadf-p1) (optional), Replacing the stamp cartridge, Feeder (dadf-p1) (optional) -12 – Canon IMAGERUNNER 2020 User Manual

Page 214: Replacing the stamp cartridge -12

Advertising
background image

Feeder (DADF-P1) (Optional)

7-12

Rou

tin

e Ma

int

ena

nce

7

Feeder (DADF-P1) (Optional)

Originals sent by fax via the feeder can be stamped to indicate that they have been
sent. Replace the stamp cartridge when this mark is faint or no longer visible.

IMPORTANT

When replacing the stamp cartridge, take care not to allow ink to come in contact with
your hands or clothing. If ink gets onto your hands or clothing, wash it off immediately
with water.

NOTE

The stamp cartridge is available only if the optional Super G3 FAX Board is attached.

Replacing the Stamp Cartridge

1

Open the feeder cover, then open the inner cover by holding
the green handle toward you.

Advertising
This manual is related to the following products: