Cisco 12406 - Manual (Page 30)

Chapter 4 Troubleshooting the Installation
Problem Solving with Subsystems
4-30
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Table 4-8 RP Alphanumeric LED Display Messages
LED Display
1
1. The messages shown do not indicate a specific sequence.
Indications
2
2. Some messages appear for a fraction of a second; others last several seconds.
LMEM
TEST Low-memory test running
LCAH
INIT Lower 15k cache initialization
BSS
INIT Initialize main memory for ROM
NVRAM
INIT Initialize NVRAM
EXPT
INIT Initialize interrupt handlers
TLB
INIT Initialize TLB
CACH
INIT Initialize CPU data and instruction cache
CACH
PARY Enable CPU cache parity
MEM
INIT Initialize main memory
NVRAM
SIZE Size of the NVRAM
PCMC
INIT Initialize the PCMCIA
EXIT
INIT Exit the initialization sequence
IOS
UP The Cisco IOS software is up and running
MSTR
RP The RP is enabled and recognized by the system