Jaypro Sports BBFP-30 - Manual (Page 3)

Rev-A Page 3 of 13
IMPORTANT NOTICE:
1) BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING
HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR
MISSING HARDWARE IMMEDIATELY.
2) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE
HAZARDOUS.
3) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE
HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR
REPLACEMENT, CONTACT YOUR DEALER OR JAYPRO SPORTS.
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
(1) 3/4” x 48” Long Re-Bar (Consult with local building code)
(1) 3/4” Socket Wrench and Box Wrench
(1) Rubber Mallet
(1) Lifting Device (i.e. Crane)
(1) Concrete
(1) Leveling Device

Unpack all parts and check against parts list to ensure that all have been
included.

Inspect all parts for damage. Report any damages to the trucking
company.
I. Site Prep
1. Determine the proper location of foul poles on the playing field, as shown
in figure 1. Dig the footing holes to the dimensions as shown on the
illustration on the next page. These are suggested dimensions for
average soil conditions, consult local building codes.
2. Pour 6” concrete footing pad and allow fully curing, or use two concrete
blocks or crushed stone, to rest foul pole on (figure 2).