Jaypro Sports BBFP-30 - Manual (Page 6)

Rev-A Page 6 of 13
II. Permanent Installation
Lower Pole:
1. Install two anti-rotation rods into the bottom side of the lower foul pole.
Center rods within the pole and install 1/2” flange nuts on both ends (see
figure 3).
2. Install the “safety stop bolt” hardware into the third hole from the top (see
figure 4). This will allow the top pole to rest inside the lower foul pole
during assembly.
3. Place the lower pole into the footing and fully support it in a plumbed
position.
4. Pour concrete into the footing and reinforce with six 3/4” x 48” long rebar
(consult local building code. Rebar not included, to be provided by
installer) evenly space around the spot for the lower foul pole.
5. Slope the top of the footing for drainage if desired. Wait for concrete to
fully cure (approx. 48 hours) before proceeding to attach the top foul pole
section.
6. Now proceed to the top pole section.
FIGURE: 3