Jaypro Sports BBFP-30 - Manual (Page 8)

Rev-A Page 8 of 13
Top Pole:
1. Install the yellow powder coated cap on top of foul pole with #12-14 self-
drilling screw (figure 6).
2. Using a lifting device (crane) insert the top foul pole into the lower foul
pole. Rotate the post so that the panels are to the inside of the field.
3. Line up and orient the panels in the top foul pole to be perpendicular to the
foul line. Drill two holes using the pre-drill hole as a guide in the lower
foul pole. Note drill holes for 1/2” hardware.
4. Attach the top and lower foul poles together with 1/2" hardware as shown
on figure 7.
5. After assembly is complete, fill gaps around the joints between the top and
lower pole with polyurethane or silicone caulk / sealant.
6. Spray / paint expose hardware if desired.
FIGURE: 6