CFM Corporation WMC36 WMC42 - Manual (Page 21)

21
WMC Series Woodburning Fireplace
20000583
Model Number Description Component
(Chimney Components con't.)
Square Chase Termination Square chimney cap used to terminate chimney SLTS8
through chase. Includes adapter.
(Flashing material)
Adapter Kit Required to unite 3-wall chimney with S20BR, S20UB
S20BT, S20BW Traditional Top Housing
Chimney Support Used to support the chimney at each 30' of TCS8A
of vertical height above the hearth and
at every 6' of inclined chimney run.
Each support adds 2¹⁄₂" to chimney length.
Firestop Required at each floor level and attic on FS2A (8" straight flue)
multi-story installation. FS6A (8" 30° inclined
flue)
Radiant Shield Used as an alternate to FS2A firestop to RS-8A
reduce the clearance from the chimney to
combustible framing. With 16" center lines.
Attic Insulation Shield Used to prevent attic insulation from FS2100-HT
(3-wall) (CF-11) contacting the chimney system.
Canada
Chimney Collar Enclosure
Installs on the "over the chimney collar" of the CCE-SK
(SK8) fireplace; provides outside air to assist in cooling
the chimney system.
Attic Insulation Shield Used to prevent insulation from coming in AIS-SK
(SK8) contact with the chimney system.
SK8 Chimney Sections Used to build chimney systems exposed above SK818CAN (1¹⁄₂' Long)
roof. SK84CAN (4' Long)
45˚ Chimney Elbows Provides 45˚ offset and return. For Canadian SK845/2
installations only. For use with SK8 chimney only.
(Maximum use of 2, or 1 pair.)
Chimney Sections Used to build chimney systems exposed above 8" flue
(3-wall) roof. 818CAN (1¹⁄₂' Long)
84CAN (4' Long)
Attic Insulation Shield Used to prevent attic insulation from FS2100-HT
(3-wall) (CF-11) contacting the chimney system.