Clarion VRX938R - Manual (Page 34)

38
VRX938R
English
Owner’
s manual
Digital Radio/DAB Operations
Programme scan
This function scans through each receivable pro-
gramme in a DAB station being received for 10
seconds sequentially. This is useful when you want
to search for a desired programme.
1. Press the [FUNC] button to receive a DAB sta-
tion.
2. Press the [SUB MODE] key in the MENU dis-
play and press the [SERVICE SCAN] key. The
unit starts scanning each programme for 10
seconds sequentially.
3. When a programme which you want to listen
is turned in, press the [DIRECT] button.
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
∗
The factory default setting is “ON”.
● Switching OFF the AF function
Touch the [DAB MODE] key in the MENU display,
the [AF] key appears in the display.
Touch the [AF] key and “AF ON” switches to “AF
OFF”. The “AF” indication goes off.
● Switching ON the AF function
Touch the [DAB MODE] key in the MENU display,
the [AF] key appears in the display.
Touch the [AF] key and “AF OFF” switches to “AF
ON”. The “AF” indication lights.
∗
If the reception of the current broadcast station de-
teriorates, “SEARCH” lights in the display and the
radio searches for the same programme on another
frequency.
∗
When AF is ON, if the reception of an RDS broad-
cast deteriorates, the AF indication flickers.
● AF function between RDS and DAB
Refer to the item of RDS tuner.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic pro-
gramme (TP) automatic tuning is also possible.
∗
RDS interrupt does not function during AM radio
reception or in TV mode.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the [TA] button when only “TP” is lit in
the display, “TP” and “TA” light in the display and
the unit is set into TA standby mode until a traffic
announcement is broadcast. When a traffic an-
nouncement broadcast starts, “TRA INFO” ap-
pears in the display. If you press the [TA] button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re-
ception is cancelled and the unit goes into TA
standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the [TA]
button. The “TA” indicator in the display goes off
and TA standby mode is cancelled.
∗
If “TP” is not lit, pressing the [TA] button searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
the “TA” in the display lights and the unit auto-
matically searches a TP station.
Information standby mode
When the INFORMATION programme selected in
the “INFO SEL” display of the adjustment mode
starts, the unit switches to the selected INFOR-
MATION programme automatically.
∗
For details on “Information select”, refer to the pro-
cedure below.
1. Touch the [TA] key, for 1 second or longer,
“INFO” lights in the display and the unit is set
to Information standby mode until information
starts.
∗
If you touch the [TA] key while the INFORMA-
TION programme is being broadcast, the pro-
gramme broadcast is cancelled and the unit
enters Information standby mode.
2. To cancel Information standby mode, touch the
[TA] key again for 1 second or longer.
Note:
• Only in case of DAB connection, this can be oper-
ated even in the RDS tuner mode.