Clarion VRX938R - Manual (Page 46)

50
VRX938R
English
Owner’
s manual
The P.EQ adjustment contents are as follows:
● “FRONT/REAR”
● “BAND”
Select the channel to be compensated (front
or rear).
● “FREQUENCY”
Select the center frequency that you want to
compensate from the range of 20 Hz to 20 kHz.
(1/3 octave step, 31 points)
● “GAIN”
Adjust the gain (output level) in the range of -
12 dB to +12 dB. (1 dB step, 25 points)
● “Q”
Set the sharpness of the Q-curve to one of the
parameters: 1, 3, 5, 7 and 20.
5. After making adjustments to a desired pattern
by repeating the operations of items 3 and 4,
touch the [RTN] key to change over to the BA-
SIC/USER pattern selection/memory display.
6. Press and hold one of [DIRECT] button for 2
seconds or longer to store the adjusted P.EQ
pattern to the USER memory.
7. To set a title of the stored USER pattern, touch
the [TITLE] key to change into the [TITLE IN-
PUT] key.
∗
For title inputting method, refer to the section
“Entering titles”.
8. Press the [A-M] button to change into the
STANDARD display.
DSP operations
DVD Operations
Operation
● Play/Still operation
Pressing and holding the [ s s s s s ] button for about 1
second or longer switches to the desired mode
(play, still (pause)).
Each time the button is pressed and held for about
1 second or longer, the mode is switched sequen-
tially.
● Chapter up/down operation (FF/FB opera-
tion)
Press the right side of [SEARCH] button for 1 sec-
ond or shorter to increment chapters.
Hold down the right side of [SEARCH] button for
1 second or longer to fast forward.
Press the left side of [SEARCH] button for 1 sec-
ond or shorter to decrement chapters.
Hold down the left side of [SEARCH] button for 1
to fast backward.