Clarion VRX938R - Manual (Page 37)

VRX938R
41
English
Owner’
s manual
NAVI Operations
NAVI functions
When Clarion Navigation (hereinafter referred to
as NAVI) is connected, the following functions are
enabled:
• Showing the NAVI display;
• Operation is available by using both the panel
side buttons and the touch panel keys.
• NAVI guidance sound interruption;
• Remote operation of navigation functions by the
remote controller through the optic sensor.
∗
If the operation of this unit is interrupted by a NAVI
operation, audio is switched to OFF.
∗
If the operation of this unit is interrupted by a NAVI
operation when the panel is closed, the sub-LCD
display is turned to “ACCS”.
Setting Clarion NAVI as external
input equipment
Be sure to perform this setting after connecting
Clarion NAVI.
∗
The factory default setting is “Clarion”.
1. When the panel is open, press the [ADJ] but-
ton to show the adjustment selection display.
2. Touch the [ z ] key to select “NAVI SELECT”.
Touch the [NAVI SELECT] key to select the
following items:
● “Clarion”: Setting when Clarion NAVI is con-
nected;
● “RGB”: Setting when a RGB image of other
company’s equipment is input;
● “COMPOSITE”: Setting when a composite
image of other company’s equipment is in-
put.
3. Touch the [Clarion] key to set connection of
Clarion NAVI.
NAVI operation
Changeover between NAVI display and Audio/Vi-
sual (hereinafter referred to as AV) displays. When
the panel is open, the [NVG/AV] button has the
same function as the [NVG/AV] button on the NAVI
remote controller to set a screen mode and a NAVI
interruption.
Operate this button to change over between NAVI
and AV displays.
∗
When the NAVI Display/NAVI guidance sound in-
terruption setting (NAVI operation) is turned to the
NAVI/NAVI mode on this unit, the audio sound is
not heard.
When the [NVG/AV] button is pressed, the screen
and audio statuses are changed cyclically as fol-
lows:
NVG ➜ NVG + BGM ➜ AV ➜ NVG.
After a route calculation is done, however, the cycle
is changed as follows:
NVG ➜ NVG-INT ➜ NVG + BGM ➜ AV ➜ NVG.
NVG: Screen status NAVI, Audio status NAVI
NVG-INT: Screen status Audio, Audio status au-
dio
Note that in case of a NAVI interruption the screen
and audio statuses are both changed to NAVI.
NVG + BGM: Screen status NAVI, Audio status
audio
Note that in case of a NAVI interruption the audio
status is changed to NAVI.
AV: Screen status audio, Audio status audio
When the NAVI display is shown with the panel
open. For the functions of the buttons for naviga-
tion control, see “3. NOMENCLATURE”.
Note:
• These buttons become normal audio operating but-
tons when changing into the AV display using the
[NVG/AV] button.