Connecting other company’s image equipment, Other functions, English – Clarion VRX938R User Manual

Page 38: Display changeover, Entering titles

Advertising
background image

42

VRX938R

English

Owner’

s manual

RGB type or composite type images from other
company’s equipment can be displayed on this
unit

Be sure to perform this setting after connecting
the RGB type or composite type image equipment
to the RGB terminal.

1. When the panel is open, press the [ADJ] but-

ton to show the adjustment selection display.

2. Touch the [

z

] key to select “NAVI SELECT”.

Touch the [NAVI SELECT] key to select the
following items:

“Clarion”: Setting when Clarion NAVI is con-
nected;

“RGB”: Setting when a RGB image of other
company’s equipment is input;

“COMPOSITE”: Setting when a composite
image of other company’s equipment is in-
put.

3. Touch the [RGB] key or [COMPOSITE] key to

select “RGB” or “COMPOSITE”.

Display changeover

When the panel is open, it is possible to change
over between AV display and external equipment
display using the [NVG/AV] button.

Connecting other company’s
image equipment

Always turning on the button
illumination on the operation panel

Note:
• The following operation is enabled when the panel

is open.

• Doing this operation turns on and off the illunination

only for the buttons of VoL [+] and [], [TILT], and
[OPEN].

The button illumination on the operation panel
when the display is turned upward, can be
switched between “ON” and “OFF”.

“OFF”: Button illumination on the operation
panel turns on for 5 seconds;

“ON”: Button illumination is always on when the
power is turned on;

1. When the panel is open, press the [ADJ] but-

ton to show the adjustment selection display.

2. Touch the [UPPER ILLUMI] key to select “ON

or “OFF”.

3. Touch the [ON] or [OFF] key for setting.

4. Press the [ADJ] button to return to the previ-

ous mode.

To set “ON” again, switch “OFF” to “ON” manu-
ally.

Entering titles

Titles up to 10 characters long can be stored in
memory and displayed for TV stations and CDs.
The numbers of titles that can be entered for each
mode are as follows.

Other Functions

CD changer mode

CDC655z connected

CDC655Tz/CDZ628

connected

CDC1255z connected

Number of titles

60 titles

100 titles

50 titles

Mode

TV mode

CD mode

Number of titles

15 titles

50 titles

You cannot enter titles with the unit in Seek, Preset
Scan, Auto store (TUNER, TV or DAB) mode. Can-
cel each of those operations before entering titles.

1. Press the [FUNC] button to select the mode

you want to enter a title (CD, CD changer or
TV).

2. Select and play a CD or a CD in the CD changer

or tune in to a TV station for which you want to
enter the title.

Advertising