Clarion VRX938R - Manual (Page 39)

VRX938R
43
English
Owner’
s manual
Other Functions
3. Touch the [TITLE INDEX] key in the MENU dis-
play.
Touch the [INPUT] key in the USER TITLE dis-
play, the display switches to the title input mode
display.
4. Touch the characters, symbols, etc. shown in
the display to input titles.
“
←
,
→
” : Centering
“BS” : Backspace
“ ” : Space
“MEMO” : Memory
“ z ( w )” : Scroll
NOTE:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
( z ) at the lower left of the display.
5. Repeat the step 4 to enter the complete title.
6. Touch the [MEMO] key for 2 seconds or longer
to store the title into memory and cancel title
input mode.
Title list play
You can display a list of titles, then select the disc
or broadcast station to listen to from that list.
∗
You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner, TV or DAB mode).
Cancel those operation modes before to display a
title list.
1. With the unit in radio, CD/MD changer, TV or
DAB mode, touch the [P. CH SELECT], [DISC
SELECT] key. A title list is displayed. The fol-
lowing functions can be carried out in a title list
display.
● TUNER: PS name (for RDS) of frequency
stored in the presets 1 to 6 or frequency is
displayed;
● CD/MD changer: DISC titles for discs 1 to 6
are displayed (By changing over a display
page in case of 12-CD changer, disc 7 to 12
can be displayed). When there is not any disc
in a changer, ”NO DISC” is displayed.
● TV: A title of a channel stored in the presets
1 to 6 or a channel number is displayed.
2. Touch the [DIRECT] key (1 to 6) to select one
of the items 1 to 6 and reproduce the selected
broadcast station or disc.
∗
In case of 12-CD changer, touch the [DISC SE-
LECT] key to change over to a list display of
discs 7 to 12.
3. Touch the [RTN] key again to return to the
STANDARD display.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to your
telephone calls on your car speakers.
∗
The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust-
ment selection display.
2. Touch the [ z ] key to select “TEL SWITCH”.
Touch the [TEL SWITCH] key to select “ON”,
“OFF” and “MUTE”.
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• When the setting is OFF, disconnect the cellular
phone from the cable or turn off the power of
the cellular phone.
● ON:
You can listen to your telephone calls from the
speakers connected to this unit.
∗
When listening to your calls on your car speak-
ers, you can adjust the volume by operating the
[VOL] button.
● MUTE:
The sound from this unit is muted during tele-
phone calls.
3. Touch the [ON], [OFF] or [MUTE] key to select
a desired mode and set it.
4. Press the [ADJ] button again to return to the
STANDARD display.
Setting the car speaker output for
the cellular phone
∗
The factory default setting is “RIGHT”.
∗
To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press the [ADJ] button to switch to the adjust-
ment selection display.
2. Touch the [ z ] key to select “TEL SPEAKER”.
Touch the [TEL SPEAKER] key to select
“LEFT” and “RIGHT”.
● LEFT:
Telephone calls can be heard on the left
speaker connected to this unit.
● RIGHT:
Telephone calls can be heard on the right
speaker connected to this unit.
3. Touch the [LEFT] or [RIGHT] key to select a
desired mode and set it.