Changing shooting functions, Af assist beam (p. 150) / red-eye, Turning off the af assist beam (p. 150) – Canon Battery Charger CB-2LY CDI-E409-020 User Manual
Page 150: Co py
150
If you set the mode dial to
G, you can change the settings in the 4 tab
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
●
Choose [AF-assist Beam], then press the
qr
buttons to choose [Off].
Changing the Flash Timing
You can change the timing for the flash and shutter.
●
Choose [Flash Settings] and press the
m
button.
●
Press the
op buttons or turn the Ê dial to
choose [Shutter Sync.] and press the
qr
buttons to choose a setting.
Before attempting to shoot using a function explained in this chapter in
modes other than
G mode, check if the function is available in those
Changing Shooting Functions
1st-curtain
The flash fires right after the shutter
opens.
2nd-curtain
The flash fires right before the shutter
closes.
EC272_CUG-E_CDI-E409.book Page 150 Thursday, August 27, 2009 3:06 PM
CO
PY