Canon Battery Charger CB-2LY CDI-E409-020 - Manual (Page 53)

53
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The monitor will turn off approximately 1 minute after the camera is last
operated. After about 2 more minutes, the lens will retract and the power will
turn off. If the flash has been raised, the flash will lower.
When the monitor has turned off but the lens has not yet retracted, pressing
the shutter button halfway (p. 23) turns on the monitor and shooting can
continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last operated.
• You can turn off the Power Saving Function (p. 147).
• You can adjust the time before the monitor turns off (p. 148).
Power Saving Function (Auto Power Down)
EC272_CUG-E_CDI-E409.book Page 53 Thursday, August 27, 2009 3:06 PM
CO
PY