Canon Battery Charger CB-2LY CDI-E409-020 - Manual (Page 88)

88
You can choose a specific person’s face to focus on and then shoot.
Register 0 to the button
(p. 153).
Set Face Select mode.
● Point the camera toward the face of the
subject and press the
button.
X After [Face Select : On] displays, a white
face frame
will appear around the face
detected as the main subject.
● Even if the subject moves, the face frame
will follow the subject within a certain
range.
● If a face is not detected, will not appear.
Choose the face on which to focus.
● If you press the button, the face frame
will move to another face detected by
the camera.
● When the frame has scrolled through all
the detected faces, [Face Select: Off] will
display, and face select will be disabled.
Shoot.
● Press the shutter button halfway. The face
frame of the chosen face will change into
a green
.
● Press the shutter button fully to shoot.
Keeping the button pressed will display the number of faces detected by the
camera (35 at the most) (orange: main subject’s face, white: detected face).
Choosing the Person to Focus On
(Face Select)
Frame
Confirming the number of detected faces
Cannot be used when in t, Stitch Assist or Movie modes.
EC272_CUG-E_CDI-E409.book Page 88 Thursday, August 27, 2009 3:06 PM
CO
PY