Casio WK1800 - Manual (Page 20)

E-18
❚ NOTE ❚
Split is produced by using Mixer internal mode CH 1 (UPPER1) and CH 3
(LOWER1) at the same time. This means you can use the Mixer to change
the volume balance and stereo pan position parameters for both the main
tone and split tone. See “Mixer Function” on page E-28 for details.
To change the location of the split point
While holding down the SPLIT button, press the keyboard key where
you want the lowest note (the leftmost key) of the upper range (right
side range) to be.
Using Layer and Split Together
You can use layer and split together to created a layered split key-
board. When you use layer and split in combination, the high range
of the keyboard is assigned two tones (main tone + layered tone),
and the low range two tones (split tone + layered split tone).
To layer-split the keyboard
1.
Select the main tone, layered tone, split tone, and lay-
ered split tone.
• Use the Mixer to select the tones, following the procedure
under “Changing the Parameters of a Channel” on page E-
30. The main tone is UPPER1, the layered tone is UPPER2,
the split tone is LOWER1, and the layered split tone is LOW-
ER2.
2.
Turn on both layer and split to layer split the keyboard.
• Press LAYER once to turn on layer.
• Press SPLIT once to turn on split.
• The LAYER and SPLIT indicators should be on the display
to indicate that they are turned on.
• The layered split tone name and number appear on the dis-
play for about five seconds. During this time you can use
the number keys to input a tone number to change the lay-
ered split tone if you want. After about five seconds, the dis-
play changes to the main tone name and number.
3.
Now try playing something on the keyboard.
4.
Press LAYER once and SPLIT once to unlayer split the
keyboard and return it to normal.
❚ NOTES ❚
• Layer-split is produced by using Mixer internal mode CH 1 (UPPER1),
CH 2 (UPPER2), CH 3 (LOWER1), and CH 4 (LOWER2) at the same
time. This means you can use the Mixer to change the volume balance
and stereo pan position parameters for each of the tones. See “Mixer
Function” on page E-28 for details.
• You can use the Mixer to turn off individual channels (layer split tones).
This means you could turn off CH 4 (LOWER2), for example, to sound a
single tone in the lower range and two layered tones in the upper range.
See “Turning Channels On and Off” on page E-29 for details.
Using Touch Response
Turning on touch response causes the volume and sound quality of
keyboard output to change in accordance with the amount of pres-
sure applied to the keyboard.
To turn touch response on and off
Press the TOUCH RESPONSE button to toggle touch re-
sponse on and off.
• Turning on touch response causes the TOUCH RESPONSE indica-
tor to appear on the display.
To set the touch response sensitivity
1.
Press TOUCH RESPONSE to turn on touch response.
• The TOUCH RESPONSE indicator appears on the display.
2.
Within five seconds after pressing TOUCH RESPONSE,
use [+] and [–] or number keys [0] to [3] to select the
sensitivity setting you want to use.
• “ExLight” outputs powerful sound even with light key pres-
sure, while “Heavy” requires very heavy key pressure to out-
put powerful sound.
• Pressing [+] and [–] at the same time returns sensitivity to
the “Normal” setting.
• In addition to pressing the TOUCH RESPONSE button, you
can also turn off touch response by selecting “Touch Off” as
the sensitivity setting.
❚ NOTES ❚
• Touch response operations affect the keyboard’s internal sound source
as well as MIDI OUT data.
• Touch response settings do not affect Song Sequencer playback, ac-
companiment, or MIDI note data received from an external source.
• Touch response affects different tones in different ways.
733A-E-020A
AMP ENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCH ENVELOPE
MIN
MAX FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATTERN EXTERNAL
INTERNAL UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STORE BANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
7 8 9
4 5 6
1
0
2 3
PARAMETER RESET:
DELETE
/YESS /NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
–]
Split tone +
Layered split tone
(LOWER1 + LOWER2)
Main tone + Layered tone
(UPPER1 + UPPER2)
Split point
WK-1800/1600(E)-16~20 03.7.31, 5:20 PM Page 18 Adobe PageMaker 6.5J/PPC