Casio WK1800 - Manual (Page 64)

E-62
733A-E-064A
3.
Use [+] and [–] or the number keys to change the
setting.
• Settings you make are applied even if you do not press the
ENTER button.
4.
Press the TUNE/MIDI button to clear the setting
screen. The setting screen also clears automatically if
you do not perform any operation for about five sec-
onds.
To make MIDI settings on the WK-1600/1630
1.
Press the MIDI button.
2.
Use the [ ̆] and [̄] cursor keys to display the MIDI
screen for the setting you want to make, as shown
below.
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
Tuning screens (page E-19)
Bulk send, receive (page E-65)
MIDI settings
See “Keyboard Settings” on
page E-58 for details on set-
tings.
To make MIDI settings on the WK-1800
1.
Press the TUNE/MIDI button.
2.
Use the [ ̆] and [̄] cursor keys to display the MIDI
screen for the setting you want to make, as shown
below.
AMP ENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCH ENVELOPE
MIN
MAX FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATTERN EXTERNAL
INTERNAL UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STORE BANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
7 8 9
4 5 6
1
0
2 3
PARAMETER RESET:
DELETE
/YESS /NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
[+]/[–]
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼
▲ ▼ Bulk send, receive (page E-66)
MIDI settings
See “Keyboard Settings” on
page E-58 for details on set-
tings.
3.
Use [+] and [–] or the number keys to change the
setting.
• Settings you make are applied even if you do not press the
ENTER button.
4.
Press the MIDI button to clear the setting screen. The
setting screen also clears automatically if you do not
perform any operation for about five seconds.
MIDI Messages
There is a wide variety of messages defined under the MIDI stan-
dard. This section details the particular messages that can be sent
and received by this keyboard. An asterisk (
* ) is used to mark mes-
sages that affect the entire keyboard, while messages without an as-
terisk are those that affect only a particular channel.
NOTE ON/OFF
This message sends data when a key is pressed (NOTE ON) or re-
leased (NOTE OFF).
A NOTE ON/OFF message includes a note number (to indicate the
note whose key is being pressed or released) and velocity (keyboard
pressure as a value from 1 to 127). NOTE ON velocity is always used
to determine the relative strength of the note. This keyboard does not
receive NOTE OFF velocity data.
Pressing a keyboard key sends the corresponding NOTE ON mes-
sage from the MIDI OUT terminal, while releasing the key sends the
corresponding NOTE OFF message.
WK-1800/1600(E)-60~66 03.7.31, 5:22 PM Page 62 Adobe PageMaker 6.5J/PPC