Casio WK1800 - Manual (Page 56)

E-54
Octave Shift
When using the piccolo tone, there may be cases when very high notes
you want to play are not included within the range of the keyboard.
When this happens, you can use octave shift to shift the keyboard
range one octave up. In this case you can use octave shift to shift the
range of the tone up or down.
Note that octave shift is available with the Pattern Sequencer only.
Use [+] and [–] to select the octave shift setting you want.
-1: Range shifted one octave down.
0: No shift
1: Range shifted one octave up.
Work Area Clear
Use this operation to clear Pattern Sequencer work area contents. You
must clear the work area when you plan to create an original accom-
paniment pattern from scratch.
1.
In the Global menu, use [ ̇] and [̈] to display the
“Work Del” screen, and then press the [+] and [–]
buttons at the same time.
• This message confirms whether or not you really what to
clear work area contents.
2.
Press YES to clear work area contents or NO to abort
the clear operation without clearing anything.
• The message shown below appears for about one second and
then the display returns to the Global menu.
– – – –
733A-E-056A
Setting
3 / 8
5 / 8
6 / 8
7 / 8
9 / 8
Setting
2 / 4
3 / 4
4 / 4 (initial value)
5 / 4
6 / 4
7 / 4
Meter (Beat)
This setting specifies the meter of the accompaniment pattern.
The display shown here appears when you specify a meter that is not
included in the table below.
IMPORTANT!
You can set the meter immediately after clearing the Pattern Se-
quencer work area only (see above). In other cases, the meter of the
accompaniment pattern currently in the work area is used, and can-
not be changed. In this case the display does not flash.
• Use [+] and [–] to change the setting.
Tempo
This setting specifies the initial tempo value for the accompaniment
pattern.
• Use [+] and [–] to set the initial tempo value within the range of
030 to 255.
• If the accompaniment pattern is playing when you change this set-
ting, the tempo of the pattern does not change immediately. The
value you specify becomes the current pattern’s default tempo val-
ue, so you need to press both TEMPO buttons at the same time to
have the newly set tempo take effect for an ongoing pattern.
❚ NOTE ❚
When you turn on the Pattern Sequencer, the initial default tempo
value of the accompaniment pattern you are using as a base is ap-
plied first.
AMP ENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCH ENVELOPE
MIN
MAX FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATTERN EXTERNAL
INTERNAL UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STORE BANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
7 8 9
4 5 6
1
0
2 3
PARAMETER RESET:
DELETE
/YESS /NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
–] (YES/NO)
WK-1800/1600(E)-48~57 03.7.31, 5:21 PM Page 54 Adobe PageMaker 6.5J/PPC