K-Edge K13-500-[color] - Manual (Page 2)

2
WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!
Tools/Items Required:
Metric Allen Set (3 mm for clamp bolts and 2 mm for the insert bolts)
Torque wrench
**GARMIN Forerunner® Quick Release Kit (required for Forerunner® 310XT and 910XT owners)**
Mount Installation:
1. Separate the upper clamp half (K13-502) from the lower clamp half (K13-501) by removing the 2x M4 x 12 bolts.
2. Install the mount onto the right side (driveside) of the stem on the handlebar.
3. Install the upper clamp half (K13-502) back onto the lower clamp half (K13-501).
4. Install, but do not tighten, the 2x M4 x 12mm bolts back into the clamp assembly.
5. Position the mount to your desired position and 'lightly' tighten the 2x M4 x 12mm bolts to hold that position.
6. Carefully torque both bolts equally to 2 N-m using an alternating pattern back and forth between the bolts.
7. IF you will be using a GARMIN Forerunner® 310XT and 910XT please proceed to "Insert Adjustment", otherwise
installation is complete.