Keri Systems MS-3000 User Manual

Ms-3000 microstar reader, Ms-3000 quick s tart guide, The ms-3000 microstar reader

Advertising
background image

MS-3000 MicroStar Reader

2305 Bering Drive

01815-001 Rev. H

San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]

Page 1 of 8

MS-3000

Quick S

tart Guide

The MS-3000 MicroStar Reader

The MS-3000 MicroStar Reader is intended for installation on a window mullion or a door frame,
on or off metal, in proximity applications where an unobtrusive reader is required. The reader
provides an audible beeper and a multi colored LED to annunciate the reader's status when used
with a PXL-250, PXL-100, or IntelliProx.

Amber - to indicate normal operation awaiting an access event

Green - to indicate a valid card has been presented or the door has been unlocked for access

Red - to indicate an invalid card has been presented or the door is in an alarm condition

The MS-3000 MicroStar Reader is housed in a black, weatherproof, shock resistant package. The
reader provides optimum performance when mounted on aluminum; read range is slightly reduced
if the reader is not mounted on aluminum.

1.0

Specifications

1.1

Dimensions

3.25 inches High x 1.41 inches Wide x 0.375 inches Deep

8.26 cm High x 3.95 cm Wide x 0.96 cm Deep

Figure 1: MS–3000 Dimensions

Advertising