Keri Systems HPP–22 User Manual
Hpp–22: hand held programmer, Hpp–22 quick s tart guide, 0 using the hpp-22
Advertising
Table of contents
Document Outline
- 1.0 Using the HPP-22
- 2.0 Programming an IntelliProx (SM-1000 and SM-2000)
- 3.0 SM-2000 Programming Commands
- 3.1 Entering a PIN
- 3.2 Changing a PIN
- 3.3 Resetting the PINs to the Factory Default Values
- 3.4 Clearing Unit Memory
- 3.5 Enrolling One Card or a Group of Cards
- 3.6 Erasing One Card or a Group of Cards from Memory
- 3.7 Enrolling One Card or a Group of Cards to Empty Slots
- 3.8 Unlock Door Command
- 3.9 Lock Door Command
- 4.0 SM-1000 Programming Commands
- 4.1 Entering the PIN
- 4.2 Changing the PIN
- 4.3 Changing the PIN to a New Value (used when the current PIN is forgotten)
- 4.4 Clearing the SM-1000's Memory
- 4.5 Enrolling One Card or a Group of Cards
- 4.6 Erasing a Card or a Group of Cards from Memory
- 4.7 Enrolling One Card or a Group of Cards to Empty Slots
- 4.8 Unlock Door Command
- 4.9 Lock Door Command
- 5.0 Using an HPP-100 in place of an HPP-22
- 6.0 Troubleshooting
- 7.0 Card Holder Log Sheet