KERN & SOHN KET-TM - Manual (Page 134)

134 KEN-TM / KET_TM-BA-e-1420
13.3 Dynamic weighing using manual start
Condition: For auto start disabled see chap. 13.2.2.

When using a weighing container,
tare with the help of the TARE key.
 Place load on weighing scale and
press to start dynamic
weighing.
 The progress bar and the set
average time will be displayed
during dynamic weighing.
 To cancel measurement, press
 The result and the set average time
will be displayed.
 Remove load and confirm by
pressing .
Then the balance is ready for
further measurements.