1 select application, 10 parts counting – KERN & SOHN KET-TM User Manual
Page 98
98
KEN-TM / KET_TM-BA-e-1420
10 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Various methods are at hand for determining a reference single weight .
(See chap. 10.3.1, chap.10.3.2).
10.1 Select application
Tap for instance symbol
in the top left corner of the display window and select
the application
< Parts counting> or you can call it up from the menu (For details
see chap. 8.1).
The piece counting window is displayed showing the unit “pcs“.
Two special function keys
<
,
>
as well as a special info field are enabled by
default for parts counting.
The reference single weight is entered as numerical value, see chap.10.3.2
The reference single weight is determined by weighing a known reference
number of parts, see chap. 10.3.1
Selecting further function keys, see chap. 7.4.2