13 stop continuous output in current weighing unit, 14 set value for “lower threshold, 15 set value for “upper threshold – KERN & SOHN KET-TM User Manual
Page 173
KEN-TM / KET_TM-BA-e-1420
173
16.3.12
Start continuous output in current weighing unit
Command:
CU1 CR LF
Possible responses:
CU1
˽
I CR LF
Command valid but can currently not be executed
CU1
˽
A CR LF
Command accepted; executing command
Weighing values will be issued in current weighing unit
1 2 3
4
5
6
7-15
16
17-19
20
21
S U I
Stability
icon
˽
Signs
Weight
˽
Unit
CR
LF
16.3.13
Stop continuous output in current weighing unit
Command: CU0 CR LF
Possible responses:
CU0
˽
I CR LF
Command valid but can currently not be executed
CU0
˽
A CR LF
Command accepted; executing command
16.3.14
Set value for “Lower Threshold“
Message:
DH
˽
XXXXX CR LF (XXXXX = threshold value)
Possible responses:
DH
˽
OK CR LF
Command executed
ES CR LF
Command not accepted
16.3.15
Set value for “Upper Threshold“
Command:
UH
˽
XXXXX CR LF (XXXXX = threshold value)
Possible responses:
UH
˽
OK CR LF
Command executed
ES CR LF
Command not accepted